wikitriada.blogg.se - Imazing im29

Emergency start only when 3 to 4 indicator LED lights are on.

DO NOT connect two cable terminals to each other.

Disconnect the unit from the vehicle’s battery within 30 seconds after the emergency start.

The emergency charging cable may overheat and disconnect as a safety precaution. The unit could be damaged by overheating.

DO NOT RUN more than three starts in a row behind you.

If the battery terminals of the vehicle are dirty or corroded, the current supplied from the unit will be reduced.

Ensure that all clean battery connections and battery terminals are securely connected before emergency starting.

Make sure that the BLUE plug of the starter cable is fully inserted into the emergency start socket.

Only use the smart cables smart cable with clamps supplied with this unit for jump starting.

Never leave this unit connected to the battery after the engine has been successfully charged.DO NOT use instead of the vehicle battery. DO NOT use this unit if the cables and their terminals are damaged.Prohibition of use for other devices such as aircraft, ships. Use for vehicles with a different voltage would be dangerous. Use only 12 V vehicles for emergency launch.Never use the device when it is dropped or otherwise damaged.Always observe the instructions in the operating instructions and all safety warnings regarding the battery and vehicle being charged when using the unit.Such batteries may burst and injure the person present or cause material damage. Do not use the device to start a car with a dry-cell battery.Do not use the cord to carry or pull the device.Do not disassemble or repair te two charging cable terminals not touch each other when the device is plugged into an electrical outlet.Be careful not to connect the battery terminals or poles to conductive objects (eg tools).Damaged device or charging cable increases the risk of electric shock. Remove all cables from the battery before attempting to drive your vehicle.Do not touch the two connection terminals at the same time while operating the device.

Never connect the appliance to the power supply with wet or damp hands. Ensure that all plugs and cables are protected from moisture.When water penetrates into electrical equipment, there is an increased risk of electric shock. Do not allow the device to be exposed to dripping or dripping water or other liquids. Ensure that the unit is always in a safe place.Humidity and / or insufficient ventilation.Subsequent damage due to unspecified and I or inappropriate use and /or faulty accumulators.Using the device for purposes other than those described in this manual.Impact of external forces, damage to equipment and I or damage to parts of the device by mechanical impact or load.The manufacturer will not be held responsible for damages caused by:.Play with cables – risk of strangulation! Do not let children play with building and assembly parts, swallow them and suffocate., or persons who do not have the skills Danger of accidents and life threatening infants and children! Never leave children unattended with packaging material.This device must not be used by children.